Product Description
Conveyor Pulley is manufactured as per customer requirement,with main design under national standard,quality inspection focusing on shaft core,welded joint,rubber material and hardness,dynamic balance and so on for longer product life time.
| Drive/Head Pulley – A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source. |
| Return/Tail Pulley – A conveyor pulley used for the purpose of redirecting a conveyor belt back to the drive pulley. Tail pulleys can utilize internal bearings or can be mounted in external bearings and are typically located at the end of the conveyor bed. Tail pulleys commonly serve the purpose of a Take-Up pulley on conveyors of shorter lengths. |
| Snub Pulley – A conveyor pulley used to increase belt wrap around a drive pulley, typically for the purpose of improving traction. |
| Take-Up Pulley – A conveyor pulley used to remove slack and provide tension to a conveyor belt. Take-Up pulleys are more common to conveyors of longer lengths. |
| Bend Pulley – A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system. |
The specification of pulley:
Drive Drum: is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210 ° ~ 230 °) , Double Drum (the angle of the belt to the drum is up to 350 °) and
multi-drum (used for high power) .
Bend Drum: is used for changing the running direction of the conveyor belt or increasing the surrounding angle of the conveyor belt on the driving roller, and the roller adopts a smooth rubber surface . The drum shaft shall be forgings and shall be nondestructive tested and the inspection report shall be provided.
The Various Surface of Pulley:
Conveyor pulley lagging is essential to improve conveyor belt performance, the combination of our pulley lagging can reduces belt slippage, improve tracking and extends life of belt, bearing & other components.
| PLAIN LAGGING:This style of finish is suitable for any pulley in the conveyor system where watershed is not necessary. It provides additional protection against belt wear, therefore, increasing the life of the pulley. |
| DIAMOND GROOVE LAGGING:This is the standard pattern on all Specdrum lagged conveyor pulleys. It is primarily used for reversing conveyor drive pulleys. It is also often used to allow bi-directional pulley rotation, and the pattern allows water to be dispersed away from the belt. |
| HERRINGBONE LAGGING:The herringbone pattern’s grooves are in the direction of rotation, and offers superior tractive properties. Each groove allows water and other liquids to escape between the face of the drum pulley and the belt. Herringbone grooved pulleys are directional and should be applied to the conveyor in a manner in which the grooves point toward the direction of the belt travel. |
| CHEVRON LAGGING:Some customers specify that the points of the groove should meet – as done in Chevron styled lagging. As before with the herringbone style, this would be used on drive drum pulleys and should be fitted in the correct manner, so as to allow proper use of the pattern and water dispersion also. |
| CERAMIC LAGGING:The Ceramic tiles are moulded into the lagging which is then cold bonded to the drum pulley. This style of finish allows excellent traction and reduces slippage, meaning that the belt tension is lower and, therefore as a result, increases the life of the pulley. |
| WELD-ON STRIP LAGGING: Weld-On Strip Lagging can be applied to bi-directional pulleys, and also has a finish to allow the easy dispersion of water or any fluids between the drum pulley and the belt. |
The Components of Pulley:
| 1. Drum or Shell:The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing. |
| 2.Diaphragm Plates: The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley Shaft and the hubs for the pulley locking elements. |
| 3.Shaft :The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection. The shaft is located and locked to the hubs of the end discs by means of a locking elements. The shaft and hence pulley shafts are often stepped. |
| 4.Locking Elements:These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates. |
| 5.Hubs:The hubs are fabricated and machined housings which are welded into the end plates. |
| 6.Lagging: It is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley. Improved traction over a pulley also assists with the training of the belt. In such cases pulley drum surfaces are `lagged` or covered in a rubberized material. |
| 7.Bearing: Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics. The bearings are self-aligning relative to their raceways, which means that the bearings can be ‘misaligned’ relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing. |
The Production Process of Pulley:
Our Products:
| 1.Different types of Laggings can meet all kinds of complex engineering requirements. |
| 2.Advanced welding technology ensures the connection strength between Shell and End-Disk. |
| 3.High-strength Locking Elements can satisfy torque and bending requirements. |
| 4.T-shape End-Discs provide highest performance and reliability. |
| 5.The standardized Bearing Assembly makes it more convenient for the end user to replace it. |
| 6.Excellent raw material and advanced processing technology enable the shaft can withstand enough torque. |
| 7.Low maintenance for continued operation and low total cost of ownership. |
| 8.Scientific design process incorporating Finite Element Analysis. |
Our Workshop:
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | Carbon Steel |
|---|---|
| Surface Treatment: | Baking Paint |
| Motor Type: | Frequency Control Motor |
| Samples: |
US$ 40/Piece
1 Piece(Min.Order) | Order Sample Free sample
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do V pulleys handle variations in load capacity and speed?
V pulleys, also known as V-belt pulleys or sheaves, are designed to handle variations in load capacity and speed effectively. Here’s an explanation of how V pulleys accommodate these variations:
Load Capacity:
V pulleys handle variations in load capacity through the selection of appropriate belt and pulley sizes. The load capacity of a V-belt drive system depends on factors such as the width and thickness of the belt, the material of the belt, and the angle of wrap around the pulley. For higher load requirements, wider and thicker belts with higher tensile strength are chosen. By selecting the right combination of belt and pulley sizes, V pulleys can handle a wide range of load capacities, from light-duty applications to heavy-duty industrial applications.
Speed:
V pulleys handle variations in speed by adjusting the pulley diameter ratio. The speed ratio between the driving pulley and the driven pulley determines the speed at which the driven component operates. By using pulleys of different sizes, the speed ratio can be adjusted to achieve the desired speed. Increasing the diameter of the driving pulley or decreasing the diameter of the driven pulley will result in higher speed, while decreasing the diameter of the driving pulley or increasing the diameter of the driven pulley will result in lower speed. This flexibility allows V pulleys to accommodate a wide range of speed requirements in different applications.
It’s important to note that while V pulleys can handle variations in load capacity and speed, there are limits to their capabilities. Exceeding the recommended load capacity or operating at extremely high speeds can lead to belt slippage, reduced efficiency, and potential belt failure. Therefore, it’s crucial to adhere to the manufacturer’s guidelines and specifications when selecting V pulleys for specific applications to ensure optimal performance and longevity.
In summary, V pulleys handle variations in load capacity by selecting the appropriate belt and pulley sizes, while variations in speed are accommodated by adjusting the pulley diameter ratio. This flexibility allows V pulleys to effectively transmit power in a wide range of applications, providing reliable and efficient operation.
How are V pulleys employed in automotive engines and accessories?
V pulleys play a crucial role in automotive engines and accessories by enabling efficient power transmission and driving various engine components. Here’s a detailed explanation of how V pulleys are employed in automotive engines and accessories:
1. Serpentine Belt System:
Modern automotive engines often utilize a serpentine belt system, which consists of a single, continuous belt that drives multiple engine accessories. The V pulley is a key component in this system, as it provides the necessary driving force for the serpentine belt.
2. Crankshaft Pulley:
The crankshaft pulley is one of the primary V pulleys in an automotive engine. It is connected to the crankshaft, which converts the reciprocating motion of the pistons into rotational motion. The crankshaft pulley drives the serpentine belt, which, in turn, drives various engine accessories.
3. Accessories Driven by V Pulleys:
V pulleys are responsible for driving several important engine accessories, including:
- Alternator: The alternator generates electrical power to charge the battery and power the vehicle’s electrical systems.
- Power Steering Pump: The power steering pump provides hydraulic assistance to make steering easier for the driver.
- Air Conditioning Compressor: The air conditioning compressor pressurizes refrigerant to cool the cabin air.
- Water Pump: The water pump circulates coolant throughout the engine to maintain optimal operating temperature.
- Engine Cooling Fan: In some vehicles, the engine cooling fan is driven by a V pulley to regulate the engine temperature.
4. Speed Control and Belt Routing:
V pulleys allow for speed control and belt routing in automotive engines. By using different-sized pulleys, the speed ratio between the crankshaft pulley and the driven accessories can be adjusted. This ensures that the accessories operate at the desired speed for optimal performance.
Additionally, V pulleys and the serpentine belt system allow for efficient belt routing, maximizing the available space in the engine compartment and optimizing the packaging of engine accessories.
5. Tensioning and Belt Alignment:
Proper tensioning and belt alignment are critical for efficient power transmission and preventing belt slippage or premature wear. V pulleys in automotive engines are often accompanied by tensioners and idler pulleys that help maintain the correct tension in the serpentine belt and ensure proper belt alignment.
6. Durability and Maintenance:
V pulleys used in automotive engines are designed to withstand the demanding conditions of engine operation, including high temperatures, vibrations, and continuous rotation. They are typically made of durable materials such as steel or aluminum.
Regular maintenance, including periodic inspection, tension adjustment, and belt replacement, is necessary to ensure the efficient operation of the V pulley system in automotive engines and accessories.
Overall, V pulleys are essential components in automotive engines and accessories, providing reliable power transmission and driving various engine systems. Their design features, combined with the serpentine belt system, contribute to the efficient operation of automotive engines, ensuring optimal performance and functionality of engine accessories.
Can you explain the typical applications of V pulleys in machinery?
V pulleys, also known as V-belt pulleys or sheaves, have a wide range of applications across various machinery and systems. Here’s an explanation of the typical applications of V pulleys:
1. Automotive Systems:
V pulleys are extensively used in automotive systems. They are found in engines, where they transmit power from the crankshaft to various accessories such as the alternator, water pump, power steering pump, and air conditioning compressor. V pulleys in automotive applications ensure efficient power transmission and enable the proper functioning of essential vehicle components.
2. Industrial Machinery:
In industrial machinery, V pulleys find widespread use in power transmission systems. They are commonly employed in belt-driven conveyor systems, where they transfer power from electric motors to drive belts that move materials or products along the conveyor lines. V pulleys are also used in various industrial equipment, such as agricultural machinery, machine tools, printing presses, and packaging machines.
3. HVAC Systems:
Heating, ventilation, and air conditioning (HVAC) systems utilize V pulleys for power transmission. V pulleys are employed in fans, blowers, and pumps used in HVAC systems. They enable the efficient operation of these components and contribute to the proper circulation of air or fluids in buildings, ensuring effective heating, cooling, and ventilation.
4. Appliances:
V pulleys are found in a range of household and commercial appliances. They are used in washing machines and dryers to transmit power from electric motors to the drum or agitator. V pulleys are also employed in power tools, such as drills and saws, to transfer rotational motion from the motor to the cutting or drilling mechanism.
5. Mining and Construction Equipment:
In the mining and construction industries, V pulleys are utilized in heavy machinery and equipment. They are commonly found in excavators, bulldozers, cranes, and loaders, where they transmit power to various components such as hydraulic pumps, winches, and conveyor systems. V pulleys in mining and construction equipment play a crucial role in enabling efficient and reliable operation in demanding environments.
6. Agricultural Equipment:
Agricultural machinery extensively employs V pulleys for power transmission. Tractors, combines, harvesters, and other agricultural equipment utilize V pulleys to transfer power to different components, including pumps, augers, conveyors, and cutting mechanisms. V pulleys in agricultural machinery facilitate the efficient performance of farming operations.
These are just a few examples of the typical applications of V pulleys in machinery. Due to their versatility, reliability, and ability to handle high torque, V pulleys are widely utilized in numerous industries and mechanical systems to ensure efficient power transmission and proper functioning of various equipment and machinery.
editor by CX
2024-04-16